ETC LED Configuration Software Programming Guide - Manual (Page 12)

9 LED Configuration Software 1.0 Programming Guide
Advanced Settings
Use the Advanced Settings tab to customize the default settings of the Quick Setup that
is selected on the Quick Setup tab for the selected fixture in the Discovered Devices
pane. Each property displays the current configuration for the fixture.
Figure-1.7 Advanced Settings tab for the XT Arch Setup with default settings.
N o t e : Not all functionality of LED Config Tool may be available for the fixture you are
configuring. Refer to the fixture’s user manual for information about its functionality.
DMX Settings
DMX Address
You can change the DMX address by entering a new one.
DMX Profile
You can customize the setting by selecting a different profile.
Strobe
Select On to turn on the strobe. Strobe flashes the output of the LED array.