Introduction, Applications, Document conventions – ETC LED Configuration Software Programming Guide User Manual
Page 4: Notices, Typography used in this guide, Notices typography used in this guide, Applications document conventions
1
LED Configuration Software 1.0 Programming Guide
Introduction
Congratulations on your purchase of LED Configuration software. LED Config Tool is
installed on a computer and used to configure fixtures on a DMX/RDM network.
LED Config Tool runs on the following operating systems.
•
Windows
®
XP (32-bit only)
•
Windows 7 (32-bit and 64-bit)
•
Windows 8 (32-bit and 64-bit)
Applications
Document Conventions
Notices
Throughout this manual, the following is used to alert you to notes.
N o t e :
Notes are helpful hints and information that is supplemental to the main text.
Typography Used in This Guide
Menu items and commands you must perform are indicated in bold text. For example:
Use DMX Address to assign a DMX address to one or more devices.
• Houses of worship
• Outdoor signage
• Museums
• Outdoor performance venues
• Theme parks
• Public sculptures
• Commercial buildings