EUCHNER MGB-L2-xxxAPx-xxx - Manual (Page 15)

15
Operating Instructions MGB-L1...AR.-... / MGB-L2...AR.-... and MGB-L1...AP.-... / MGB-L2...AP.-...
4x M6
2x M6
0,5 Nm
1 Nm (6x)
Cutout for escape release
Tightening torque 4 Nm
Recommended fastening material
For fastening the guard locking module on the mounting plate
DIN 912-M6X25-8.8 ZN CAP SCREW
For fastening the handle module on the mounting plate:
DIN 7984-M6X10 ZN CAP SCREW
Figure 8: Installation example for door hinged on the right (general view)