FasTest SnapMate OEM Main Seal Replacemen - Manual

REPLACEMENT INSTRUCTIONS
www.fastestinc.com
Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
PAT# 6,039,303 WP041 10/6/2010
FasTest Part# STR012
MAIN SEAL
MAIN SEAL
SCPB10 Main Seal Replacement
Valved In-Line
DESCRIPTION:
Main Seal Replacement for internally valved,
in-line with pin grip.
Please thoroughly read the instructions to properly replace the seal. The SnapMate is
designed to provide a safe, reliable leak-tight seal and connection when properly
maintained and operated.
• The main seal is specifically designed for the application. DO NOT use any
substitute seal.
• Follow the replacement instructions carefully.
• DO NOT use excessive force to replace seal as this may damage the seal or
connector.
• Use caution when disassembling the connector.
REPLACEMENT:
1) Have connector in its relaxed position. Piston should be forward, protruding
out of the sleeve. Sleeve should be back against hex.
2) Using a repair pick, or similar tool, remove the main seal as shown in the
diagram. Exercise caution so as not to scratch or deform the seal groove.
This could cause a potential leak path.
3) Using the same tool, work the replacement seal into the seal groove. Exercise
caution so as not to puncture or tear the seal during replacement. This could
cause a potential leak path.
4) Lubricate lightly with an oil compatible with your system / process.
FasTest, Inc. Product Warranty
FasTest, Inc. warrants its products against defects of workmanship and/or material for 12 months
from the date of the sale by FasTest, Inc. This warranty is void if the product is misused, tampered
with or used in a manner that is not in accordance with FasTest, Inc. recommendations and/or
instructions. FasTest, Inc. is not liable for consequential or other damages including, but not limited
to, loss, damage, personal injury, or any other expense directly or indirectly arising from the use of
or inability to use its products either separately or in combination with other products. ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED, WHETHER ORAL OR WRITTEN, INCLUDING BUT
NOT LIMITED TO WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE EXPRESSLY EXCLUDED.
Remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original selling
price, at the option on FasTest, Inc. All allegedly defective products must be returned prepaid transportation to FasTest,
Inc. along with information describing the products performance, unless disposition in the field is authorized in writing by
FasTest, Inc.
SLEEVE BACK
REPAIR PICK
(Not Included)