FasTest HPB Series - Manual

OPERATING INSTRUCTIONS
Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
www.fastestinc.com
WP100 Rev D 11/16/2012
Sleeve Forward Position:
Test Piece Connected & Sealed. Sleeve Retracted Position:
Insert or Remove Test Piece.
Sleeve Forward
Sleeve Retracted
Test Piece
Rear Knob
Termination Port
Connector Maintenance:
•
A daily, weekly and periodic inspection of the connector by competent
person is recommended. User must establish a regular interval for
maintenance as determined by the user media and operational
environment.
•
Inspection should include visual checks of the collet sealing area, sleeve,
missing or loose components, leak tightness, ease of operation, sufficient
lubrication, wear, dirt accumulation and damage.
•
Establish a regular interval for lubrication. The media and environment will
be determining factors in establishing this interval to prevent dryness
and/or corrosion.
•
Difficulty of operation after continual use indicates a need for lubrication
or other maintenance.
•
Use only original FasTest spare parts that are designed for the
application and are subject to strict quality control. See Warranty.
Safety Warnings – Guidelines:
•
If instructions are not completely understood by operator or components
are missing, contact FasTest before attempting use of the connector.
•
FasTest HPB Connectors are not internally valved, and will not prevent
loss of media when disconnected. Do not attempt to disconnect unless
safe conditions are met.
•
FasTest HPB Connectors must only be used with test pieces of a specific
size as indicated by the part number. Improper use could cause
separation of the connector from the test piece resulting in physical harm
or damage.
FasTest, Inc. Product Warranty
FasTest, Inc. warrants its products against defects of workmanship and/or material for 1 year from the date of the sale
by FasTest, Inc. This warranty is void if the product is misused, tampered with or used in a manner that is not in ac-
cordance with FasTest, Inc. recommendations and/or instructions. FasTest, Inc. is not liable for consequential or oth-
er damages including, but not limited to, loss, damage, personal injury, or any other expense directly or indirectly aris-
ing from the use of or inability to use its products either separately or in combination with other products. ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED, WHETHER ORAL OR WRITTEN, INCLUDING BUT NOT LIMITED TO
WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
EXCLUDED.
Remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original
selling price, at the option on FasTest, Inc. All allegedly defective products must be returned prepaid transportation to
FasTest, Inc. along with information describing the products performance, unless disposition in the field is authorized
in writing by FasTest, Inc.
HPB Sleeve Activated Connectors
Description: HPB Series Connectors Seal on Male Threads or
Male Tube Features.
HPB Connectors provide a reliable leak-tight connection that
grips and seals on male threads. Simply insert male end of test
piece into collets and slide sleeve forward, collets will collapse
to grip and seal.
Please thoroughly read and understand these operating
instructions prior to operating the connector. The use of
pressurized media for sealing and testing requires a thorough
understanding of the FasTest HPB Operating Instructions.
•
Installation
•
Operation
•
Connector Maintenance
•
Safety Warnings – Guidelines