FasTest Panel Mount - Manual

INSTALLATION INSTRUCTIONS
Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
www.fastestinc.com
WP035 10/6/2010
5. Install retaining ring into groove on the seat.
6. Make sure the I.D. of seat is clean, and then inspect the
Core to ensure the o-rings is free of contamination and foreign
particulates. Lightly lubricate with compatible refrigerant oil.
7. Thread Core into seat and torque clockwise to 8 ft-lb’s.
FasTest, Inc. Product Warranty
FasTest, Inc. warrants its products against defects of workmanship and/or material for 12 months from the date of the sale by FasTest,
Inc. This warranty is void if the product is misused, tampered with or used in a manner that is not in accordance with FasTest, Inc.
recommendations and/or instructions. FasTest, Inc. is not liable for consequential or other damages including, but not limited to, loss,
damage, personal injury, or any other expense directly or indirectly arising from the use of or inability to use its products either
separately or in combination with other products. ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, WHETHER ORAL OR
WRITTEN, INCLUDING BUT NOT LIMITED TO
WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
Remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original selling price, at
the option on FasTest, Inc. All allegedly defective products must be returned prepaid transportation to FasTest, Inc. along with
information describing the products performance, unless disposition in the field is authorized in writing by FasTest, Inc.
Access Valve Installation
Description: Installation instructions of the Nut and
Clip Style Seat Panel Mounts.
Nut Style Panel Mount
1. Cores should remain in protective packaging until assembly
is required to ensure cleanliness and eliminate damage. Just prior to
assembly remove the Core from packaging tray.
2. Insert seat thru hole in panel and thread nut onto seat.
3. Braze SEAT ONLY onto tube or valve block before installing/threading
Core into seat.
®
Example: Tube brazed to Seat
Tube
Seat
Nut
Panel
Brazed
Area
Retaining Ring
Clean I.D.’s of Seat
Clean & Lube O-Ring
CoreMax Core