FasTest SnapMate Service Main Seal Replacement - Manual

®
REPLACMENT INSTRUCTIONS
Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
www.fastestinc.com
WP038 10/6/2010
Collets
Sleeve
Cross-Section
View
Main Seal
Sleeve Down
Collets Up
Main Seal
location in Piston
Piston
Quarter-Section
View
SCBA07H Main Seal Replacement Kit for
SnapMate ® Service Tool
Description: Main Seal Replacement Instructions for
Service Version SnapMate
®
Please thoroughly read the following steps on properly replacing
the main seal on the SnapMate Service Tool.
Replacement steps:
1. Hold connector with collets facing upward.
2. Slide sleeve down as shown.
3. With small screw driver or pick remove the main seal from piston and discard. Exercise
caution so as not to scratch or damage the main seal groove.
4. Place the new seal down through the collets into the piston, with a small screw driver or
blunt pick push the seal into piston groove. Exercise caution so as not to damage the seal or
groove.
FasTest, Inc. Product Warranty
FasTest, Inc. warrants its products against defects of workmanship and/or material for 12 months from
the date of the sale by FasTest, Inc. This warranty is void if the product is misused, tampered with or
used in a manner that is not in accordance with FasTest, Inc. recommendations and/or instructions.
FasTest, Inc. is not liable for consequential or other damages including, but not limited to, loss, damage,
personal injury, or any other expense directly or indirectly arising from the use of or inability to use its
products either separately or in combination with other products. ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED, WHETHER ORAL OR WRITTEN, INCLUDING BUT NOT LIMITED TO
WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY EXCLUDED.
Remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original
selling price, at the option on FasTest, Inc. All allegedly defective products must be returned prepaid transportation to
FasTest, Inc. along with information describing the products performance, unless disposition in the field is authorized
in writing by FasTest, Inc.