Garland SHDUBA10000 INDUCTION DUAL-ZONE BASE-LINE COOKERS - Manual (Page 11)

Installation RTCSmp Induction Dual Base-Line Cookers
Part # 4532290 Rev 2 (1/15/14) 11
4.3 Adjustable Feet
• The feet (provided) on the countertop unit are
height-adjustable and lockable. (Feet Complete
Assembly part# 95000120)
• There are non-slip rubber pads on the feet.
• Optional: the feet can be inserted into the
Tabletop Self-Adhesive Foot Pads (part#
72264020). These pads can be affixed onto the
counter surface.
• To adjust the height of the unit, simply rotate the feet to raise or lower the unit.
• To lock the feet into position, rotate the plastic locks counter-clockwise and tighten them against the
bottom of the unit.
4.4 Electrical Installation
IMPORTANT
• Refer to the specifications in chapter 3 Dimensions and Technical Specifications AND
• Ensure the supply voltage and the line current match the specifications given on the rating plate. A
stable mains supply must be provided.
the rating
plate/instruction labels on the unit. Always refer to the rating plate/instruction labels on the unit to
verify the electrical data. Rating plate/label information overrides the information listed in this manual.
CAUTION
Wrong voltage will damage the induction unit. Follow
strictly the specifications on the rating plate.
• The electrical connections must satisfy the national and local electrical codes.
• If ground fault current protective switches are used, they must be provided with selective activation and
designed for a minimum fault current of 30mA. Multiple generators with a mains connection must not be
connected to a single fault current protective switch.
• This induction unit is equipped with a power cable which can be connected with the necessary plug to
the socket. Ensure the plug is easily accessible for disconnecting from the power supply. Put the control
knob in the 0 (OFF) position BEFORE connecting to the electrical supply.