Garland SHDUBA10000 INDUCTION DUAL-ZONE BASE-LINE COOKERS - Manual (Page 12)

Installation RTCSmp Induction Dual Base-Line Cookers
12 Part # 4532290 Rev 2 (1/15/14)
To setup the unit for operation:
1. Ensure the control knob is at the 0 (OFF) position.
ON-Position
Any position where
“0” is not pointing to
the LED light. The
light is on. OFF-Position
“0” is pointing to
the LED light. The
light is off.
2. Remove all objects from the glass top and check that the glass top is neither cracked nor broken.
CAUTION
Do not continue if the glass top is cracked or broken.
Contact an authorized service agency for assistance.
3. Connect the unit to the power supply.
4. Perform the Function Test. See chapter 5 Function Test.