Garland SHDUBA10000 INDUCTION DUAL-ZONE BASE-LINE COOKERS - Manual (Page 9)

Dimensions and Technical Specifications RTCSmp Induction Dual Base-Line Cookers
Part # 4532290 Rev 2 (1/15/14) 9
3.5 Electrical Specifications
Model Voltage Power Plug Configuration
SHDUBA7000 208 V AC / 3Ph / 60Hz 7000 W (2x 3500W) / 22A
SHDUBA7000 400 V AC / 3Ph / 50Hz 7000 W (2x 3500W) / 11A
SHDUBA7000 440 V AC / 3Ph / 50Hz 7000 W (2x 3500W) / 10A Plug Not Included
SHDUBA10000 208 V AC / 3Ph / 60Hz 10000 W (2x 5000W) / 30A
SHDUBA10000 400 V AC / 3Ph / 50Hz 10000 W (2x 5000W) / 16A
SHDUBA10000 440 V AC / 3Ph / 50Hz 10000 W (2x 5000W) / 15A Plug Not Included
3.6 Operating Conditions
Max. Tolerance of Nominal Supply Voltage +6 /-10 %
Network impedance (Zmax.) 0.25 Ω
Supply frequency 50/60 Hz
Ingress Protection class IP X3
Minimal Diameter of Cooking Pan 5” (12cm)
Maximum Ambient Temperature In Storage > -4°F to +158°F (-20°C to +70°C)
In Operation >+ 41°F to +104°F (+5°C to +40°C)
Maximum Relative Air Humidity In Storage > 10% to 90%
In Operation > 30% to 90%
Clearance from Combustible Material Min. 1.57” (40mm)
Installation Clearance Min. 1.57” (40mm) behind the unit, 0.79” (20mm) on
either sides
Installation Clearance (when installed in a tight
space/corner) Min. 1.57” (40mm) on all sides
3.7 Compliances
• North American models:
ETL listed in compliance with UL 197, CSA C22.2 No.109, NSF-4. Complies with FCC part 18, ICES-001
• CE models comply with the latest European Norms:
EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)