INFICON IO1000 I/O module User Manual
Page 11
Advertising
Description
11
Pin assignment:
The output pins can be freely configured.
RS232 b
Connection for RS-232
Galvanic isolation (max. 60 V DC, 25 V VAC against GND)
Pin assignment:
A normal RS-232 cable must be used for the connection (1:1 connection, RxD and
TxD not crossed, no zero-modem cable).
► Deactivate RS-232 hardware handshake in RS-232 control program.
If the hardware handshake cannot be deactivated, the RS-232 can be used as
follows:
1
Analog output 1: ANALOG-OUT 1
2
Analog output 2: ANALOG-OUT 2
3
GND to analog output
Pin Name
2
TxD
3
RxD
5
GND
Fig. 4
Connection with RS-232 cable (in case hardware handshake cannot be
deactivated)
Advertising