INFICON IO1000 I/O module - Manual (Page 15)

Installation and removal
15
5 Installation and removal
5.1 Mount I/O module on DIN-TS35 top hat rail
1 Hook unit on top hat rail at bottom.
2 Press unit onto top hat rail at top.
5.1.1 Establish connections
Connecting I/O module with leak detector
The I/O module communicates via data cable with the leak detector and is supplied
with voltage by the data cable.
1 Connect I/O module (connection “LD”) via data cable with leak detector
(connection “I/O Anybus”).
2 Connect I/O module via desired interfaces with external controller:
– RS232 (RS-232 interface)
– RS485 (RS-485 interface)
– Analog in (analog inputs)
– Analog out (analog outputs)
– PLC IN, digital inputs
– PLC OUT, digital outputs
Fig. 6 Mounting of I/O module