INFICON IO1000 I/O module - Manual (Page 6)

6
Safety
2 Safety
2.1 Intended use
The I/O module is a device interface between a leak detector and an external
controller.
► Install, operate and service the unit only in compliance with these instructions.
► Comply with the limits of application (see chapter 4.3, page 14 ).
2.2 Owner requirements
Safety conscious operation
► Operate and install the unit only if it is in perfect working order and as intended,
in a safety-conscious manner and fully aware of dangers, in compliance with
these instructions.
► Fulfill and ensure compliance with the following regulations:
– Intended use
– Generally applicable safety and accident prevention regulations
– International, national and local standards and guidelines
– Additional provisions and regulations that are specific to the unit
► Use only original parts or parts approved by the manufacturer.
► Keep this manual available at the operating site.
Personnel qualifications
► All work must be performed only by technical specialists who have been trained
on the unit.
► Allow personnel in training to work with the unit only under the supervision of
technical specialists.
► Make sure that the authorized personnel have read and understood these
instructions and all other applicable documents (see chapter 1.2, page 4 ),
especially the information on safety, maintenance and repairs, before starting
work.
► Define responsibilities, authorizations and supervision of personnel.
2.3 Operator requirements
► Read, observe and follow the information in these instructions and the working
instructions created by the owner, especially the safety instructions and warnings.
► Perform all work based on the complete instructions.