3 settings overview, Notice, 4 i/o – INFICON Sensistor Sentrac Hydrogen Leak Detector User Manual
Page 54: 5 show password, 6 about, Settings overview, Show password, About
Advertising
52
ni
n65
e1-a (140
9)
3
In Settings, click on the backup from SD-button
The previously exported settings, including any recipe, is imported to the instrument.
11.3
Settings Overview
To show all settings, click Info >> Settings overview.
11.4
I/O
To show the PLC Out and PLC In status visually click Info
>>
I/O.
The Analog Out level is also shown. The displayed digits shows the voltage.
11.5
Show password
To show the set password(s), click Info >> Password.
11.6
About
To shown the serial number and software version of the instrument and probe, click
Info >> About.
Notice
If recipe is used, only active settings are shown.
Advertising