INFICON SQC-122C Thin Film Deposition Controller Communications Manual - Manual (Page 10)

120 Commerce Drive
•
Fort Collins, Colorado 80524
•
(970) 416-9660
•
Fax (970) 416-9330
Σ
Sigma
instruments
Get Output Thickness
Command: O
Description: Returns the average thickness of all sensors assigned to the requested
output.
Parameters: Output Number
Example: To Get Output 1 thickness send: O1
The return string is of the form: 1.000
Get Sensor Frequency
Command: P
Description: Returns the frequency of the requested sensor.
Parameters: Sensor Number
Example: To Get Sensor 1 frequency, send: P1
The return string is of the form: 5543210.0
Get Power
Command: R
Description: Read the output power for a channel.
Parameters: [1..2]
Example: To get output 1 Power in %, send: P1
A85.3 Output power is 85.3% of full scale value.