Installation instructions, Quick start, Mount the matrix – Intelix DL-HDM44 User Manual
Page 10: Shelf mounting instructions, Rack mounting instructions, Quick start mount the matrix
DL-HDM44 Installation Guide
10
Installation Instructions
Quick Start
Mount the Matrix
Shelf Mounting Instructions
Rack Mounting Instructions
1.
Mount the matrix
2.
Connect sources
3.
Connect displays
4.
Connect control (optional)
5.
Apply power
At least 2 inches of free air space is required on both sides of the DL-HDM44 for proper side ventilation. Avoid
mounting the DL-HDM44 near a power amplifier or any other source of significant heat.
Rubber shelf feet are already attached to the bottom of the DL-HDM44 to help accelerate the installation of
the DL-HDM44.
Remove the rubber feet from the bottom of the matrix. Remove
the larger two screws on both sides of the DL-HDM44.
Attach the supplied rack ears to the sides of the DL-HDM44
matrix. The matrix requires one rack unit (1 RU) of space. It is
recommended that you leave an empty rack space above and
below the DL-HDM44 for additional cooling.