Intelix DL-HDM44 - Manual (Page 11)

DL-HDM44 Installation Guide
11
Connect Sources
Connect Displays
Connect the source devices to HDMI inputs using HDMI cables
that are less than or equal to 5 meters in length. For source
devices that are further away, it is highly recommended to
install a Digitalinx DL-HD70 or DL-HDE100.
Connect the display devices to HDMI outputs using HDMI
cables that are less than or equal to 5 meters in length. For
display devices that are further away, it is highly recommended
to install a Digitalinx DL-HD70 or DL-HDE100.
Connect External IR Control
Insert the TRS 3.5 mm plug of the supplied IR receiver to the
matrix IR input port (IR In) of the matrix.
When the DL-HDM44 is installed in an equipment rack or other concealed location, access to the front panel
for normal IR control may be difficult. The IR In input allows the IR remote to control the matrix via the supplied
IR receiver.