Intelix DL-HDM44 - Manual (Page 15)

DL-HDM44 Installation Guide
15
Front Panel and IR Remote Operation
Front Panel Operation
To set a route using the front panel of the DL-HDM44, press the desired output button (display) until the
preferred input source is selected.
If output B is currently viewing input 4, the output B button
would need to be pressed three times to view the content on
input 3.
IR Remote Operation
The buttons on the IR remote will allow direct routing of inputs to a specific output. The Power button will
send the matrix to a low power state. Pressing the Power button a second time will restore the DL-HDM44 to
full power.
OUTPUT
B 1 2 3 4
OUTPUT
D 1 2 3 4
OUTPUT
C 1 2 3 4
OUTPUT
A 1 2 3 4
POWER