Router connection, Crossover cable connection, Web browser control – Intelix DL-HDM44 User Manual
Page 13: Crossover cable pinout
DL-HDM44 Installation Guide
13
Router Connection
1.
Configure the router to use the same IP range as the matrix, such as 192.168.0.1.
2.
Connect the computer to the router.
3.
Connect the DL-HDM44 to the router
Crossover Cable Connection
1.
Configure the computer to use the same network prefix as the IP address assigned to the matrix. For
example, the IP address of the matrix is 192.168.0.178. Set the computer to use a static IP address within
the same network range, such as 192.168.0.42.
2.
Connect the network crossover cable to the computer and to the TCP/IP port on the DL-HDM44.
Web Browser Control
The DL-HDM44 includes a web portal to allow control of the matrix via a standard web browser. The IP address
is the same address that is used for TCP/IP control. See page 16 for detailed information regarding the web
browser interface, including customization.
TIA/EIA-568A
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1
8
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1
8
Crossover Cable Pinout