Intelix FLX-44 - Manual (Page 16)

FLX-44 Installation Guide
16
Connect TCP/IP (Ethernet) Control
The FLX-44 may be controlled via Ethernet with a third party control system or through a web browser interface.
Additionally, the FLX-44 has an advanced RS232 control mechanism which will transmit RS232 commands through
the HDBaseT output port to control remote devices with a simple command string. Intelix recommends using the
DIGI-HD60C-R for installations which require RS232 extension.
See page 27 for all available control commands for the FLX-44.
The TCP/IP port requires a standard straight-through Category 5 or
greater cable with the TIA/EIA-568B crimp pattern for operation.
The default settings for the TCP/IP port are:
IP address: 192.168.0.178
Port: 8080
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
Matrix Control via TCP/IP (Ethernet)
Connect the Ethernet cable between to the matrix and a router with
a straight-through cable or between the matrix and a computer
with a crossover cable.
Router Connection
1. Configure the router to use the same IP range as the matrix, such as 192.168.0.1.
2. Connect the computer to the router.
3. Connect the FLX-44 to the router