Intelix FLX-44 - Manual (Page 6)

FLX-44 Installation Guide
6
The Intelix FLX-44 is a four input by four output HDBaseT/HDMI matrix switcher. The Intelix FLX-44 matrix improves
the ease of installation similar to previous Intelix HDMI matrix switchers.
The FLX-44 features HDBaseT twisted pair extension for each output, and simultaneous HDMI on the first two
outputs, allowing the same signal to be routed to the HDMI connector and a remote destination with an HDBaseT
receiver. The HDBaseT ports support 1080p HDMI video with audio, bidirectional wide-band IR, matrix control
via IR, RS232 tunneling, and HDCP up to 60 meters (196 feet). Each HDBaseT output port supplies power to the
attached extender, eliminating the need for a power supply at the display end. Each output features stereo audio
de-embedding for connection to amplifiers or DSPs.
The FLX-44 can be controlled via front panel buttons, front panel IR, external IR, remote IR through HDBaseT
extenders, RS232, and Ethernet. Clear button caps provide legible text on the front panel, which can be customized
for each installation. The matrix includes a simple IR remote control to allow IR switching. This IR remote control
can be learned into universal remotes and IR based control systems. An IR All In port is provided, which allow one
IR connection to control all four remote displays.
The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus
control via a web browser. RS232 commands to remote displays can also be embedded in the control stream
through the matrix from both the RS232 and Ethernet control ports, which will reduce the number of serial ports
required for the control system.
The FLX-44 is HDMI compatible and supports up to 2K resolutions, Deep Color, and full 3D capabilities. The matrix
features advanced EDID and HDCP handling, including the ability to turn HDCP compliance ON and OFF to ensure
maximum functionality with a wide range of sources.
Product Overview