Intelix FLX-44 - Manual (Page 18)

FLX-44 Installation Guide
18
Apply Power
Plug the power supply into the power input port on the rear
of the matrix.
Connect the IEC power cable into the power supply. The matrix will
turn on once the IEC cable is plugged into AC power.
LCD Panel Boot-up Information
While the matrix is booting up, the front LCD panel will show the IP address of the matrix and the current version
of firmware. After five seconds, it will show Intelix FLX-44. The backlight will go dark after five seconds.
See page 23 on how to customize the information displayed on the LCD panel.