Intelix FLX-44 - Manual (Page 31)

FLX-44 Installation Guide
31
Technical Specifications
I/O Connections
HDMI Inputs Four (4) HDMI Type A Receptacle (1 per input)
HDMI Outputs Two (2) HDMI Type A Receptacle (Outputs 1 and 2 only)
HDBaseT Outputs Four (4) 8P8C port (Shielded RJ45) (1 per output)
IR Inputs Four (4) 3.5 mm jack (TRS)
IR All In One (1) 3.5 mm jack (TRS)
IR Outputs Four (4) 3.5 mm jack (TS) (1 per output)
IR Eye One (1) 3.5 mm jack (TRS)
RS232 Tunnel Four (4) 3-pole Removable Euroblock Connector (3.5mm)
Audio Outputs Four (4) 3-pole Removable Euroblock Connector (3.5mm)
48V DC Power One (1) Amphenol 4pin CPC Female (11-4)
Control, Rear Panel RS232 via DE-9, TCP/IP via 8P8C, IR via 3.5mm TRS
Control, Front Panel Push Button, IR
Supported Audio, Video and Control
Maximum Video Compatibility at 60 m Deep Color 36/30/24 Bit at 1080p
Maximum Video Compatibility at 35 m Deep Color 48 Bit at 1080p, 3D, and 4k x 2k
Supported 3D Formats Field Alternative (interlaced), Frame Packing, Line Alternative Full, Side-By-Side Half, Side-
By-Side Full, 2D + Depth, 2D + Depth + Graphics + Depth
Embedded Audio Compatibility Up to PCM 5 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
IR Carrier Frequency Range 33-55kHz at 5 volts
RS232 Baud Rate Up to 115200 baud
HDBaseT Signal Characteristics
Maximum Distance 70m (230 ft)
Cable Requirements Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Bandwidth 10.2 Gbps
Gain 0 dB – 10 dB at 100 MHz
Signal to Noise Ratio (SNR) > 70 dB at 100 MHz over 100 m
Return Loss < -30 dB at 5 KHz
Total Harmonic Distortion (THD) < 0.005% at 1 KHz
Min-Max Signal Level < 0.3 V – 1.45 Vp-p
Differential Phase Error ±10° at 135 MHz over 100 m
Chassis and Environmental
Enclosure Painted Aluminum
Dimensions 435 mm x 235 mm x 44 mm (17.13 in x 9.25 in x 1.73 in)
Rack Spacing 1 RU
Shipping Weight 2.27 kg (5 lbs)
Operating Temperature 0° to +40° C (+32° to +104° F)
Operating Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Power, ESD, and Regulatory
Power Supply Input 100V-240VAC / 1.8A
Power Supply Output 48vDC / 5A
Power Consumption 150 watts (max)
ESD Protection 15kV
Device Regulatory CE, RoHS
Power Supply Regulatory UL, FCC, CCC, CE, RoHS
Other
Warranty 2 years
Diagnostic Indicators LCD output status and power LED
Included Accessories Installation Guide, IR Remote, RS232 cable, US Power Cable and Power Supply, Two
Mounting Brackets with screws, Four Rack Feet with screws, Eight 3-pole Removable
Euroblock Connectors (installed on matrix)
Compatible IR Transmitter (IR Emitter) DIGIB-EMT
Compatible IR Receiver (IR Eye) DIGIB-EYE
Compatible Receivers (AV Only) DIGI-HD70-R
Compatible Receivers (AV and Control) DIGI-HDE-R
Compatible Receivers (AV, Control and Power) DIGI-HD60C-R
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.