I.R.I.S. 402 - Manual (Page 18)

Network Configuration:
The IP Camera acts as a network device. It allows users to configure network functionalities based on
applications. This section will describe the network configurations. Fundamentally, for instance, the IP
assignment of the device can be done via DHCP server, static IP option or PPPoE to obtain IP from the
service provider.
There are six subdirectories within the Network Configuration category:
Network Type
Network Connectivity
Quality Service
Access Port
Access IP Filter
Network Type:
Network Type:
There are 3 ways to configure IP address for the IP camera device, including DHCP, Static IP and PPPoE.
Enable DHCP Service: (Default Setting). The camera is automatically assigned an IP address by the
DHCP server when connected to a network.
Use Static IP: Camera may also be manually assigned a static IP address. Subnet mask, Gateway and
DNS server(s) will also need to be specified for certain network functionality.
Enable PPPoE Service: This service is usually provided by an ISP (Internet Service Provider). IP Camera
can establish a dial-up connection to the ISP and then get connected to Internet.