I.R.I.S. 402 User Manual
Page 35
Advertising
Install Micro-SD Card (not supported on all models - please check with your vendor for details):
The IP2 camera supports on-board Micro-SD storage. Due to the water-resistance design, it is necessary to
follow the SOP provided below to complete the installation properly. Please note, this feature is not available
on certain models. Please consult your supplier for further details.
Step 1: Unscrew the rear cover of the camera:
Step 2: Carefully open the rear cover and find the card slot for installation:
Step 2: Carefully open the rear cover and find the card slot for installation:
Advertising