I.R.I.S. 402 - Manual (Page 26)

Event Management:
Event management describes the handling of events with the corresponding actions. A common case can be
exampled is storing a captured image to a local storage (Actions), when there is a Motion Event (Trigger
Condition). This chapter gives the configurations of Triggers (what to detect?) and Actions (“what to send”
and “where to send”). A time based schedule can also be applied.
Event Management Configuration:
There are 4 subdirectories in the “Event” category. The 4 configuration groups are correlated. A completed
event setting may need to configure each part in sequence.
Event Server & Media
Motion Configuration
DI / DO Settings
Event List
Event Server & Media:
The “Event Server” is the configuration of “where to send”, e.g. FTP server, while Media is the sending file
type. The combination of file type and the remote servers will then be applied as an event action.
Event Server List:
Click on “Add New” button to add the remote severs. These are email recipients and FTP server.
Email: Send the media file via email when an event is triggered.
Mail Server Address: Enter a host name or IP address of the email server.
User Name: Enter the user name of the email account.
Password: Enter the password of the email account.
Server Port Number: Enter the server port of the mail server. The default is 25.
Sender’s E-mail Address: Enter the email address of the sender
Mail Subject Prefix: Enter the subject description for the mail.
Receiver Table: Enter the recipients’ email address. The mail can be sent to up to 5 recipients.
FTP: Send the media file to a FTP server when an event is triggered.
FTP Server address: Enter the FTP server’s address.
User Name: Enter the user name of the FTP login account.
Password: Enter the user name of the FTP login password.
Server Port Number: Enter the server port of the FTP server. The default is 21.