I.R.I.S. 402 - Manual (Page 34)

Maintenance:
This page provides tools for camera system maintenances.
Reboot: Restarts the camera system
Restore to Factory Default: Restore camera factory default settings. Network setting can be kept by
checking the “Except Network Type” checkbox.
Backup Configurations: System settings can be backed up and exported to a file. The file can be
applied to upload the previous user settings to the camera, or other cameras.
NOTE
The backup file can be applied to other IRIS IP2 cameras, so users won’t need to configure each device. It is
recommended to switch the IP setting to DHCP mode before exporting the backup file, Otherwise, all IP
cameras will have the same IP address.
Firmware Upgrade: Upgrades firmware for the camera. Retrieve the firmware image file, import to the
camera and then instigate the upgrade process.
LOG Service:
System operations and / or process are recorded in the log system. These links allow the various log records
to be reviewed.
System Log: Contains records of system changes such as login failed or link on/off.
Event Log: Records the log message of triggered event, for instance, motion detection activation.
Parameter List: Lists system parameters with current values.