I.R.I.S. 402 - Manual (Page 29)

Motion Configuration (Continued):
DI / DO Setting: (Not available on all models. Contact Vendor for details)
The DI/DO setting provides the information of Digital I/O’s initial and current status. The initial status can be
configured while current status is detected by the IP camera system.
Digital input (DI) can be configured as one of the trigger conditions. When its current status is different from
the initial status, the trigger is activated.
Digital output (DO), on the other hand, can be one of the responding actions. When its current status is
different from the initial status, the output is triggered.
Event List:
Lists a summary of configured events. That is the configuration of trigger condition(s) and the corresponding
actions, as well as the scheduling. Up to 10 event objects can be configured.