JULABO FP51-SL Ultra-Low Refrigerated Circulators - Manual (Page 43)

FP51-SL
43
9.4. Configuration

 
Press the key if a parameter is to be retained. (prior to OK)
Level 2 Parameter level
or
Remote control via serial interface.
Possible parameters: off / on

Switch on and off remote control by
pressing and

First set the >type< of interface (RS232
or RS485) in the MENU >INTERFACE
SERIAL< and then switch >Remote< to
>on<.

Control display in the top line
for Remote

Connect SERIAL with PC.

Switch over setpoint
setting by pressing
and
External setpoint setting
Possible parameters: off / Eprog / PT100

Switch over setpoint setting by pressing
and
off – Setpoint setting with the keys
or
Setpoint setting via the analog socket „ext.
Pt100
or
analog socket >REG+EPROG<
Autostart
Possible parameters: on / off

Switch on and off Autostart by pressing
and