2 synchronize with server ... period, Synchronize with server ... period, 26 configuration - time server (sntp) – JUMO 706585 LOGOSCREEN fd Operating Manual User Manual
Page 188

26 Configuration - Time server (SNTP)
188
26.2 Synchronize with server ... period
Overview
Synchronize
with server
The parameter determines if synchronization over SNTP is active.
Server
A maximum of 3 servers can be indicated. The user can enter a server (DNS
name) or an IP address. Entry of the server name is the preferred option.
The 3 servers are queried from top to bottom – as a result, the second server is
only queried if the first one is not accessible, etc. If no sever can be reached,
the "Time server error" message will be entered into the event list. Synchroni-
zation will be attempted again in the next rhythm.
Period
Period defines in which intervals the time of the paperless recorder will syn-
chronize with the external server.
The following settings are possible:
• 1 hour
• 12 hours
• 24 hours
Yes
SNTP is active.