JUMO 706585 LOGOSCREEN fd Operating Manual - Manual (Page 82)

7 Memory Manager
82
Activation
for USB stick
Start via menu
h Activate the memory manager by rotating and pressing the control
knob (CF card must be inserted).
H
Access to the Memory manager menu via the header is not
possible with a USB memory stick.
If one of the visualization modes (Chapter 4 - e.g. Curve
Presentation) is active when a USB memory stick is inserted, the
menu automatically appears and remains active until the memory
stick is removed again.
If not all functions are available, then you must log in to the device
first, in order to obtain the required access rights.
v Chapter 8.2 "Log-in and Log-out"
A
The USB memory card must not be removed while a data transfer
to or from the stick is in progress.
Service data- > CF card
Save all + update CF card
CF card -> config. data
Config data -> CF card
Backup -> CF card
Update CF card
Close memory manager
CF card -> user list
Software update
Remove hardware safely