JUMO 706585 LOGOSCREEN fd Operating Manual - Manual (Page 24)

2 Instrument Description
24
2.4 Relay Outputs
A maximum of 7 relays (1 as standard, 6 as an extra) is available to signal, for
instance, alarms or limit infringements. The action can be configured as break
(SPST-NC) or make (SPST-NO) contact.
There are two ways of finding out whether the 6 additional relays are available:
• Check the type code on the nameplate against the type designation. Please
refer to the Installation Instructions B 706585.4 for an explanation of the
nameplate and type designation.
• Read the information on the instrument, in the menu Device manager 
Device info  Hardw.
2.5 Counter/Integrators
These are not electrical measurement inputs (hardware), but channels which
are calculated by the paperless recorder (software).
The terms counter and integrators encompass the following elements:
• Counter
• Integrators
• Operating time counter
• High-speed counter (hardware counter)
• Flow rate quantity