11 setup program – JUMO 902931 Wtrans Receiver with Wireless Data Transmission Operating Manual User Manual
Page 84
Advertising
11 Setup program
84
USB/TTL
Figure 37: Establishing the connection between the PC and receiver
via USB/TTL converter and adapter socket
Procedure:
(1)
PC
(5)
Modular jack RJ-45
(2)
USB plug
(6)
Adapter of the modular cable
(3)
USB socket
(7)
Adapter socket, 4-pin
(4)
USB/TTL converter
(8)
Receiver interface
Step
Action
1
Connect the USB plug of the USB cable (2) to the PC (1).
2
Insert the USB socket of the USB cable (3) into the plug of the USB/TTL converter (4).
3
Insert the RJ-45 modular plug (5) of the modular cable into the RJ-45 socket of the USB/
TTL converter (4).
4
Connect the 4-pin adapter socket (7) to the adapter of the modular cable (6).
5
Connect the 4-pin adapter socket (7) to the receiver interface (8).
Advertising