JUMO 706030 LOGOPRINT 500 Printing Recorder Operating Manual - Manual (Page 21)

21
2 Instrument description
Configuration
level 2 (C2-level) Configuration level 2 can be accessed from configuration level 1 with the aid
of the
h + R keys, or from configuration level 3 by using e.
Configuration level 2 includes the following global parameters:
- unit name
- open-collector output
- chart speed in limit operation
- timed operation (feed time)
- print-out of speed change
- print-out of the “power on” text
- print-out of the “power off” text
- scaling print
- time print
- print channel number
- report
- start text
- end text
- presetting
- code number
H
If a correct code number is entered when calling up the parameter
level, then the signal acquisition and recording will be interrupted
in this level. The parameters can be viewed and altered.
H
The relays of the external relay module ER8 remain in the present
state. They will only be switchable again when the printing record-
er has been returned to the operating level or the basic status.