JUMO 706030 LOGOPRINT 500 Printing Recorder Operating Manual - Manual (Page 9)

9
1 Introduction
1.3 Typographical conventions
1.3.1 Warning signs
The signs for Danger and Warning are used in this manual under the
following conditions:
V
Danger
This symbol is used where there may be danger to personnel if the
instructions are disregarded or not followed accurately!
A
Warning
This symbol is used where there may be danger to equipment or data if the
instructions are disregarded or not followed accurately!
E
Warning
This symbol is used where special care is required when handling
components which are liable to damage from electrostatic discharge.
1.3.2 Note signs
H Note
This symbol is used when your attention is drawn to a special remark.
v
Reference
This sign refers to further information in other manuals, chapters or sections.
abc
1
Footnote
Footnotes are notes which refer to certain points in the text. Footnotes
consist of two parts:
Marking in the text and the footnote text.
The markings in the text are arranged as continuous superscript numbers.
h
Action
This symbol shows that an action to be performed is described.
The individual steps are designated by the star, for example:
h Press the
h
key
h Confirm with
E