JUMO 706030 LOGOPRINT 500 Printing Recorder Operating Manual - Manual (Page 50)

3 Operation and visualisation
50
3.5.14 Service print
The service print can only be initiated from the keys on the printing recorder
(Operating level
Î Service print).
The print-out consists of:
- the current date and time
- the software version
- the number of mains power supply interruptions
- the total operational time of the recorder in hours
- the current state of the two event counters
- the minimum and maximum ambient temperatures of the internal Pt100
cold junction
H
Any text print-outs which were started will be aborted and not
continued after the service print. This also applies to the statistical
report.
H
All requests for text printing which occur during the service print
will be stored and carried out after the service print.
H
If the mathematics/logic module is activated, an “M” will be printed
after the software version.
13.45 03.11.98 SERVICE PRINT
Software version
: 105.02.01
Power interrupts : 00012
Operating time [h] : 01234
Event counter 1 : 00000
Event counter 2 : 09000
Temp.-Min. : +20.32
Temp.-Max. : +31.02