JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Operating Manual - Manual (Page 29)

29
4 Temperature measurement
4.3 Evaluating measured temperatures
The following example shows how measured temperatures can be evaluated.
Example Measured medium: hot water
TAG number: 2 (TAG name: PAN02)
Upper limit: 90.0°C
Lower limit: 50.0°C
Sequence
h Switch the instrument on and select a user name, if required (
, keys and
SET ). Normal display appears in the LCD display.
h Press the RIGHT key
( ) . The TAG name is shown.
h First check whether the screen displayed is for the TAG name of TAG No.2.
If not, press the UP or DOWN key ( , ) to select the TAG name for TAG
No.2.
The TAG name that is shown when the RIGHT key ( ) is pressed is the TAG
name which was selected before the instrument was switched off.
If, for example, the TAG name of TAG No.5 was selected last, the TAG name of
TAG No.5 is shown when you change the display over from the date to the
TAG name.
Normal display Example:
TAG name for
TAG No.1 Example:
TAG name for
TAG No.2
Instrument was
switched off when
the TAG name for
TAG No.5 was
shown.
Date and time TAG name
Power ON