JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Operating Manual - Manual (Page 44)

6 Peak/Bottom value storage
44
6.2 Resetting the peak value
h Press the MENU/POWER key in the peak value display;
The “Peak reset?” message is shown on the screen.
h If you press the SET key, the peak value is reset.
h If you press the ESC key, the current peak value is retained.
After SET or ESC, the display returns to showing the peak value.
6.3 Resetting the bottom value
h Press the MENU/POWER key in the bottom value display;
The “Bottom reset?” message is shown on the screen.
h If you press the SET key, the bottom value is reset.
h If you press the ESC key, the current bottom value is retained.
After SET or ESC, the display returns to showing the bottom value.
Peak value Reset value
Peak value
Cancel
procedure
SET =
reset value
On resetting, the current temperature
instantly becomes the peak value.
Bottom value Reset value
Bottom value
Cancel
procedure SET =
reset value
On resetting, the current
temperature instantly becomes
the bottom value.