5 data logger – JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Operating Manual User Manual
Page 36
Advertising
5 Data logger
36
h Press the MENU/POWER key to display the
TAG filter screen.
h Press the UP key
(
)
to change the setting to
“ON”.
h Press the SET key to activate the TAG filter.
The TAG name is again displayed on the screen.
h If you press the UP or DOWN key
(
,
)
you
will now only see the data that have been
stored under the TAG name.
h Press the ESC key twice to return to normal
display.
H
How can I cancel the TAG filter time setting?
Change the TAG filter position by pressing the
DOWN key (
) to “OFF” and then press the SET key.
blinking
blinking
Advertising