KD Scientific Adagio Control Software for Legato Series Manual - Manual (Page 26)

Adagio User Manual © 2010 KD Scientific
5619-001 Rev B
26
Y-axis has the following characteristics:
• Values will be measured and shown in the flow units selected by you.
• The maximum value (always positive) will be determined by the
maximum flow between those defined by you within the steps of the
method. It will be also limited by the maximum flow allowed by the
selected pump and syringe models (see 4.2.3). The maximum flow will
be represented by a horizontal line with a tag showing the value. The
area above this maximum flow will be shaded gray.
• The minimum value (always negative) will be automatically set to the
absolute value of the maximum flow with the negative sign whenever the
maximum value is changed. The minimum flow will be represented by a
horizontal line with a tag showing the value. The area below this
minimum flow will be shaded gray.
• The area around zero below the absolute value of the minimum flow that
the pump is capable of performing will be indicated by two horizontal
lines. The area between these lines will be shaded gray. Furthermore,
the value represented by the line will be drawn on top of each line,
aligned to the right.
• It will be crossed by the X-axis always at flow rate 0.
• Zoom options are available to allow you to increase / decrease the visual
flow precision.
Both the X and Y-axis provide a drag-and-drop mechanism that allows
you to freely move along the time / the flow range. To use it, drag the zone
near to the axis values (when the mouse pointer changes to a double-arrow
icon).
A pair of buttons (- and +) allow you to zoom in and out and thus
increase / decrease the visual time precision.