KD Scientific Adagio Control Software for Legato Series Manual - Manual (Page 27)

Adagio User Manual © 2010 KD Scientific
5619-001 Rev B
27
4.2.4.3. Status bar information
A status bar located on the bottom of the flow evolution chart shows the
following information when the mouse pointer is moved over the graph area:
• Time: corresponding to the horizontal position in which the mouse
pointer is located. It is shown in time format (hh:mm:ss).
• Flow: corresponding to the vertical position in which the mouse pointer
is located. The flow unit value is formatted depending on how many
digits are accepted by the pump model. Therefore the most suitable unit
will be determined to show the most accurate number possible.
• Step duration: the duration of the selected step (or the step to be
added) as an integer value measured in seconds.
• Step volume: the partial real volume that is to be infused / withdrawn
within the current step up to the current time. It is shown with two
decimals in the most suitable volume units (determined by the
application depending on the precision of the value).
• Accumulated volume: the total real volume that is to be infused /
withdrawn by the method up to the current time. It is shown with two
decimals in the most suitable volume units (determined by the
application depending on the precision of the value).
4.2.4.4. Spreadsheet View
A
Spreadsheet View is available to display the target values of each step.
Click on the ‘Spreadsheet View’ tab located on the top of the graph to view
the spreadsheet.
Double-clicking on a step in the spreadsheet will open the Step Editor
window. This allows you to edit the steps target values.