KD Scientific Adagio Control Software for Legato Series Manual - Manual (Page 4)

Adagio User Manual © 2010 KD Scientific
5619-001 Rev B
4
INSTALLING ADAGIO
Before using Adagio, check the system requirements and then install the
software onto your hard drive.
1.1. SYSTEM REQUIREMENTS
Although Adagio is an easy-to-use software method, the processing of the
data requested and generated by the pumps mobilizes an important
amount of PC resources and can be highly time-consuming if the computer
used is not powerful enough. We recommend the use of a computer that
meets the following minimum requirements:
1) 2 GHz Pentium® processor or higher.
2) 512 MB of RAM (1 GB recommended)
3) Windows 7, XP SP3 or Vista (XP recommended)
4) Free RS-232 or USB 2.0 ports (depending on the quantity,
model and connectivity of the controlled pumps).
Daisy-chained pumps require a single port. Direct PC to Pump
connections require one free port per pump.
5) Microsoft® Excel® 97 or higher.
1.2. Installing the Software
Insert the provided USB Flash Drive into your PC. Open the drive titled
‘PBLicense’. Click on the Adagio Setup executable to launch the
installation wizard.