KD Scientific Adagio Control Software for Legato Series Manual User Manual
Page 47
Adagio User Manual
© 2010 KD Scientific
5619-001 Rev B
47
• Event record
This data sheet includes an Event Record Table with the following
columns:
o
Current time: real start time (within the 24 hours of the day) of
the event
o
Event time: start time (within the method execution) of the event
o
Event
description
o
Current flow rate: the flow rate of the method at that time
o
Total volume infused until that time (accumulated positive
flows)
o
Total volume withdrawn until that time (accumulated negative
flows)
o
Total volume disposed until that time (difference between
infused and withdrawn)
Each event will be recorded as a row in Excel table. Event
descriptions included within the table are the following:
o
Method start: User starts the method execution.
o
Step start: the step has started (including its name).
o
Step end: the step has ended (including its name).
o
Method paused: the method execution has been paused
(whether it be manually or by the application)
o
Method resumed: the method execution has been resumed.
o
Pump stalled: the application has detected that a pump is stalled
(including its name). See 5.2.3.
o
Comm error: the application has detected a communication
error. See 5.2.3
o
Error: the application has detected an internal error. See 5.2.3
o
Method end: the method execution has been finalized (whether it
be manually or by the application)
• Data log
This data sheet includes periodical values throughout the execution.
These values are obtained each minute during the method execution.
The following information will be logged:
o
Elapsed Time: Elapsed time since the execution started.
o
Flow Direction: Direction of the flow - infuse or withdraw.
o
Flow Rate and Units: Flow rate of the pump at the current
elapsed time
o
Accumulated Volume and Unit: Accumulated volume
infused/withdrawn till the moment.
o
Dispensed Volume and Unit: Dispensed volume since the last
log reading (1 minute).