Klein Tools VDV501-090 - Manual (Page 12)

12
ENGLISH
Step 1
TONING CABLE
Tone Mode can be used to trace cables by sound. A cadence is emitted
from the unit through a connected cable. The cadence can only be
detected and amplifi ed with an analog tone probe, such as the Klein Tools
PROBEplus tone tracing probe (VDV500-060) not included, and is not
audible to the human ear without the probe.
• Enabling Tone Mode:
1. Attach the cable to be toned as instructed in Preparing to Test
Cables section. Cables Cables
2. Press the Power button.
3. Press the Tone button (two music notes).
4. Press the Up button or Down button to switch cadences (HI, LO,
HL1, HL2).
5. Use a tone probe to trace the cable being toned.
6. See the tone probe's instruction manual for more information on
how to tone cables.
Step 3