Klein Tools ET510 - Manual (Page 2)

ENGLISH
PackaGE cONTENTS
a. Main Unit
b. Gooseneck camera 17mm
c. Mirror camera attachment
d. Hook camera attachment
e. Magnet camera attachment
f. USB Power adapter/charger
g. USB Data/charger cable
GENEraL SPEcIfIcaTIONS
The Klein Tools ET510 Borescope is an extendable video camera used
to view inaccessible areas. It features a durable camera snake with an
adjustable intensity LED worklight, a 2.4" LCD screen, auto power off, and
screen mirroring.
• Dimensions: 6.53" x 2.84" x 1.55" (16.59 x 7.22 x 3.95 cm)
• Weight (Main Unit): 8.08 oz. (229.3 grams)
• Weight (Gooseneck camera): 1.73 oz. (49.0 grams)
• Operating altitude: 2000 meters
• Operating Temperature: 0°C /32°F to 50°C / 122°F
• Storage Temperature: -20°C/ -4°F to 60°C / 140°F
• relative Humidity: 85%
• Environmental Protection (Gooseneck camera): IP67 (dust proof,
water immersible up to 1 meter for up to 30 minutes)
• certifications: CE, WEEE
• Screen resolution: 480 x 234px
• color Depth: 24 bits
• fixed focus Distance: 1.97"~5.90" (5~15cm)
• camera Diameter: 0.67" (17mm)
• Gooseneck Length: 3.28' (1m)
• Battery Life (Typical): 3 hours continuous operation (LEDs off)
WarNINGS
To ensure safe operation and service of the Video Borescope, follow these
instructions. Failure to observe these warnings can result in severe injury
or death.
• The Borescope and gooseneck camera are NOT insulated. Avoid
probing areas where energized conductive elements may be present.
Shut off power to the nearby work areas before starting work.
• Avoid probing areas where chemicals may be present.
• Do not probe moving machinery that could catch the Borescope and
cause harm to the operator and the Borescope.
• The Borescope is not intended for use on people or animals.
• Do not use the Borescope near sources of heat.
• Keep steady footing at all times, following ladder safety procedures
when necessary.
• Do not use if the Borescope casing is cracked or broken in any way.
WARNING SYMBOLS:
Always wear approved eye protection.
Do NOT use on energized circuits.
Do NOT probe moving machinery.
a
b
c
d
e
f
g
ET510 Borescope
Instruction Manual
fEaTUrE LayOUT
1. LcD Screen: 2.4" TFT LCD screen.
2. Power Button: Press and release to turn the instrument on and off.
3. Worklight Up Button: Increases the brightness of the camera-
mounted LEDs up to 100. Press and hold to change quickly.
4. Worklight Down Button: Decreases the brightness of the camera-
mounted LEDs down to 0 (off). Press and hold to change quickly.
5. Mirror/auto Power Off Button: Short press mirrors the display over
the x-axis. Long press enables auto power off mode. Short presses
in auto power off mode change auto power off time (off, 5 minutes,
10 minutes).
6. camera Input Socket: Screw into place once the camera output plug
is inserted.
7. USB charging Port: Attach the borescope to a computer via USB
to charge battery. Attach to included 5V adapter to charge via a
standard power outlet.
8. camera Head: Contains the CMOS sensor and LEDs. The arrow on
top indicates the camera is right-side up.
9. Gooseneck: Rated to IP67 to withstand all ingress of dust and
submersion in water up to 1 meter. Caution: bending the gooseneck
to 90 degrees or greater can permanently damage it.
10. camera Output: Attaches to borescope body when the notch is
oriented correctly.
fEaTUrE LayOUT
1
2
3
5
6
4
7
8
9
10
ET510-139730ART-English.indd 5-8 5/29/12 4:02 PM