Landoll 9630 Field Cultivator - Manual (Page 101)

ASSEMBLY INSTRUCTIONS
3-23
4 Row Coil Tine Harrow
Installation
See Figures 2-11 thru 2-24 for 4 Row Coil Tine Harrow
placement dimensions.
1. Attach two coil tine harrow arms to 4 row coil tine
harrow assembly using u-bolts and 5/8-11 flange
head serrated nuts (See Figure 3-17.)
2. Install 1/2-13 x 1-1/4 round head square neck screws
through angle adjustment plate and gang bar plate
as shown in Figure 3-18.
3. Assemble 4 row coil tine harrow assembly arms to
the rear of the field cultivator frame using 5/8-11 x 5
hex head cap screws, harrow mounting plate, and
hex lock nuts.
Figure 3-18: Angle Adjustment Plate Installation
ANGLE ADJUSTMENT PLATE
1/2-13 X 1-1/2 RD HEAD
SQ NECK SCREW (PLACE IN
2ND OUTER HOLE FROM TOP)
1/2-13 X 1-1/4 RD HEAD
SQ NECK SCREW
GANG BAR PLATE
(PLACE
IN 2ND OUTER HOLE FROM
BOTTOM)
angle adjustment plate