Wing frames, Wing lift tire installation, Front gauge wheel installation – Landoll 9630 Field Cultivator User Manual
Page 85
Advertising
ASSEMBLY INSTRUCTIONS
3-7
Wing Frames
1.
Attach wing frames to center frame using 1-1/4
flange bearings, flat washers, fold pin, and 5/16 x
2-1/2 spring slotted pins (See Figure 3-3.)
Wing Lift Tire Installation
1.
All lifts and hubs come already assembled from the
factory.
2.
Mount tires on the wheels and install on hubs (See
Figure 3-3.)
3.
Recommended tires for wings:
11L X 15, 12 ply tires
NOTE
All tire/wheel assemblies are mounted with the valve
stem facing outward.
Front Gauge Wheel Installation
1.
Attach front gauge wheel assemblies to the wings
using gauge wheel clamp plate, 3/4-10 x 5 hex head
cap screws, and hex lock nuts (See Figure 3-3.) For
front gauge wheel placement, see Figure 2-2.
Advertising