Leica Biosystems SM2010 R - Manual (Page 13)

11 Leica SM2010 R
4.3 Unpacking
• To lift the instrument from the box, hold it on
the left and right of the housing ( Fig. 5 ), lift it
out of the foam cushion of the package and
place it on a stable lab table.
• Remove all adhesive tape used as transport
anchors.
4.4 Setup
Loosening the transport locking screw of the
knife sledge
23
11
12
Fig. 6
4. Instrument Setup
First check the shipment for external damages upon arrival.
If it is evident that the shipment was damaged during transport,
please make a claim to the carrier immediately.
• Open the packaging.
• Remove all foam material.
• Take out all accessories and the instruction manual.
Do not transport the instrument by hold-
ing it by moving parts, on the knife
sledge, coarse driving wheel or the
knob for setting the section thickness.
Fig. 5
The locking knob (23) secures the knife
sledge during transport.
In daily operation, it is also used to lock
the knife sledge in place.