Leica Biosystems SM2010 R - Manual (Page 7)

5 Leica SM2010 R
2. Safety
Warnings - Safety instructions / warning labels attached to the instrument
Warnings - Transport and installation
Warnings - Working at the instrument
Warnings - Cleaning and maintenance
• Safety notes on the instrument itself, which are marked with a warning triangle, indicate that
the correct operating instructions (as defined in these Instructions for Use) must be followed
when operating or replacing the item marked. Failure to adhere to these instructions may re-
sult in an accident, personal injury, damage to the instrument or accessory equipment.
• Once unpacked, the instrument may be transported only in an upright position.
• Before transporting the instrument, the knife sledge must be locked with the locking knob
(23, Fig. 2) !
• Do not transport the instrument by holding it by the knife sledge, coarse driving wheel or the
knob for setting the section thickness.
• Be very careful when handling microtome knives or blades. The cutting edge is extremely
sharp and can cause serious injuries!
• Always wear work safety shoes and safety gloves!
• Never place a knife anywhere with the cutting edge facing upwards and never try to catch a
falling knife! Always put the knives back into the knife case when not in use!
• Always clamp the specimen block BEFORE clamping the knife.
• Lock the knife sledge and cover the knife edge with the knife guard prior to any manipulation
of knife/blade or specimen, prior to changing the specimen block and during all work breaks.
• Always wear protective glasses and a mask when sectioning brittle specimens!
• Risk of splintering!
• Before each cleaning, remove the knife or disposable blade!
• Do not use solvents that contain acetone or xylene!
• Ensure that liquids do not enter the interior of the instrument during cleaning!
• When using cleaners, please comply with the safety instructions of the manufacturer and the
laboratory safety regulations!