Leica Biosystems EG1150 C - Manual (Page 18)

18 Instructions for Use V 2.4 RevD – 10/2012
6. Cleaning and Maintenance
6.1 Cleaning the instrument
Work surface
• All common laboratory cleaning products suitable for the removal of paraffin
(e.g. Paraguard or xylene substitutes) can be used to clean the work area.
Instrument and exterior surfaces
• If necessary, clean the painted exterior surfaces with a mild household cleaner or
soapy water and wipe with a damp cloth.
• Avoid prolonged contact of organic solvents on the surface of the instrument. Do not
use xylol or acetone on the painted surfaces!
6.2 Maintenance instructions
Please observe the following points to ensure the instrument's reliable function over
extended periods:
• Clean the instrument with care daily.
• Regularly remove dust from the ventilation slots on the back of the instrument with a
brush or vacuum cleaner.
• Have the instrument inspected at least once a year by an authorized Leica customer
service technician.
• Enter into a service contract at the end of the warranty period. For more information,
contact the relevant Leica customer service organization.
Switch off the instrument each time before cleaning and pull out the power plug.
While handling cleaning materials, observe the safety regulations of the manufacturer and the
lab regulations valid in the country of use.
During cleaning, do not allow any liquid to penetrate inside the instrument!
To prevent scratching the surface of the instrument, do not use metallic tools with sharp edges
under any circumstances.
Only Leica service technicians are authorized to open the instrument for maintenance and
repair work.